Introduction
How to make an arched doorway the appearance of any room can be transformed by creating some soft and curved hole. You create character, charm, and feel of a custom when you know how to make an arched doorway with no huge budget.
You will find that something to do with making an arched doorway is largely a matter of planning, patience and a few simple tools. At the end, you will be confident enough in going ahead to transform a plain square hole into a smooth and stylish arch at the comfort of your own home.
Plan Your Arch Shape
Before you choose up any tools, make your mind up the exact way you want to make an arched doorway in your area. Find the width and the height of your existing hole and consider how deep the curve needs to be. When you are planning how to create an archway, draw the shape on a piece of paper or put painter tape on the wall to visualize the end result.
Ensure that doors, windows and switches should not have issues with the new arch. Planning will make you not make any mistakes and the project will not be in danger and it will be clean and comfortable.
Collect Basic Material and Equipment.
Then you should gather the general stuff that you have to know how to create an arched doorway with no stress. Most of the tools are a tape measure, level, pencil, handsaw or jigsaw, drill, drywall screws and protective equipment such as goggles and mask.
The arch is likely to consist of plywood or MDF, wood or metal studs, drywall, joint tape and joint compound. It will save time and make you remain focused on each step rather than focus on finding tools that are missing.
Mark and Cut Arch Template.
In order to start forming the curve, you will draw a basic template, which will instruct you on how to form an arched doorway with a smooth line. Use a plywood or cardboard, which is as large as the opening. Trace the middle and mark a soft arch on one side to the other side using a string and a pencil, or a flexible ruler.
. Slice along the line gradually, making sure that the curve is natural and balanced.
Build the Arch Frame
After the preparation of the template it is now necessary to construct the frame which demonstrates how to make an arched doorway within the wall. First, affix pieces of wood or metal of short length to the already available studs, in order to hold the curved top. Draw your template on two panels of plywood or MDF then cut corresponding arches.
These works will make the left and right side of the curve. By following the instructions of making an arched doorway in this manner, you are making a powerful foundation which makes the shape and keeps the structure stable.
Attach Drywall to the Arch
So there you now see how to make an arched doorway appear solid and smooth with the addition of drywall. First cut pieces of dry wall to fit the flat sides of the opening.
When you are using the procedure to create an arched doorway, try to install the screws in small, consecutive intervals to prevent the cracks. Bend the board at your own pace so as to have a straight curve and no sharp bumps or dents.
Tape, Mud, and Sand the Curve
Apply joint taping to all joints, and apply joint compound in thin layers. Allow one quarter of the coats to dry before applying the other.
You always sand between layers when you are going to make an arched doorway, so as to take away the lines and ridges. The curve is well done with a soft sanding sponge. Continue feeling the shape with your hand to determine whether there are any high or low spots.
Prime, Paint, and Add Trim
Once the surface has been smooth, you can complete instructions on how to make an arched doorway and seal and decorate. Begin with a nice primer to ensure that the paint adheres and the surface appears smooth.
You may also install plain trim or beads of corners on the edge when you perfect the manner of making an arched doorway. Such minor details also render the arch professional and refined.
Check Safety and Comfort
Check all the details before you make an arched doorway safely. Ensure that the opening is tall and wide enough such that you do not bump your head or shoulders. Check to ensure that the drywall has no loose screws, rough edges or cracked sections. Check in the local doors, windows and lights to ensure that all is ok.
A final check in haste is what will assure you and to keep your new arch comfortable and safe to use on daily.
Final Thought
The idea to build an arched doorway can look like a large task and once it is divided into small steps, it becomes easy. You have designed the shape, constructed the frame, put on drywall and done finishing on the surface carefully. The level of each phase develops your skills and confidence and you might discover that you like the slow, creative process.
After completing this project, you will look differently into your room and be proud each time you pass through the smooth curve that you designed and constructed by yourself.
Friendly Advice
You should always take time when you embark on any form of DIY work, you do not want to hurry and complete your workWear protective clothing, maintain the area clean and have a friend to assist in the process of moving heavy pieces of boards or supporting drywall.
IShow yourself mercy, every project is an opportunity to learn and develop.
Conclusion
And now you understand the principal procedure of the making up of an arched doorway. Using simple equipment, proper planning and a bit of patience, you can manage to make a simple opening into something featuring that adds a warm and stylish touch to your home.
This kind of project is an intelligent method of value addition without significant remodelling. Looking at your completed arch you will find evidence of the fact that the hard work and the easy ways may develop something beautiful, personal, and permanent.
